Viofo HK3-C Continuous power supply with straight USB-C connection to permanently supply your Viofo A139 dashcam with power, among other things. Because the cable is connected directly to the power of the battery, it is no longer necessary to use the cigarette power supply in the car. With this continuous power supply, the dashcam can be used in parking position with the ignition switched off.

3-wire

This continuous power supply can be connected to three points in the car's fuse box. connected. The Viofo A139 models, among others, require a connection at three points to use the automatic parking position. The Red wire is connected to a continuous fuse (which also supplies power when the ignition is switched off), the Yellow wire to a switched fuse (which switches on and off with the ignition) and the black wire to earth.

Variable battery protection

The power supply has a built-in module with a switch that ensures that the car's battery does not run out while filming with the dashcam. The switch can be set to 11.8V/23.6V, 12.0V/24.0V, 12.2V/24.4V or 12.4V/24.8V. The power is interrupted when the battery voltage falls below the set threshold.

Installation

View at this page the detailed instructions on how to install this Continuous Power Supply.

Specifications

Length: 3.5m (Plug -> 2.5m -> Inverter > 1.0m -> Fuse/Battery).
Plug: USB-C
Input: 12V/24V
Output: 4.7V 2.0A
Battery protection: Adjustable
Type: 3-wire

NOTE: The cable must be connected in the fuse box of the car, this always entails the risk of damage or fire. The installation of this accessory is at your own risk, Dashcamdeal is not liable for damage caused to the car by the installation or use of this accessory. It is also recommended to inquire at your car dealer about the possible lapse of warranty due to or after connection of this power supply.